Diagnostic procedure

DIAGNOSTIC PROCEDURE CHART

STEP	INSPECTION		ACTION
1	VERIFY RELATED REPAIR INFORMATION AVAILABILITY Verify related Service Bulletins and/or on-line repair information availability. Is any related Service Bulletins available?	Yes	Perform repair or diagnosis according to the available Service Bulletins. If the vehicle is not repaired, go to the next step.
1		No	Go to the next step.
2	VERIFY TROUBLESHOOTING OF DTC P062F HAS BEEN COMPLETED Verify that all disconnected connectors reconnected. Clear the DTC from the PCM memory using the M-MDS. Perform the KOEO self-test. (See KOEO/KOER SELF TEST .) Is the same DTC present?	Yes	Replace the PCM, then go the next step. (See PCM REMOVAL/INSTALLATION .)
2		No	Go to the next step.
10	VERIFY AFTER REPAIR PROCEDURE Perform the "AFTER REPAIR PROCEDURE ". (See AFTER REPAIR PROCEDURE .) Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE .)
10		No	Troubleshooting completed.