FixVault
Home › Mazda › 2011 › RX-8 R3, 1.3 2 › Repair and Diagnosis › Electrical › Body Electrical › Power Systems › Main Fuse Removal/Installation › Notes

Main Fuse Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the main fuse block cover.
  3. Remove in the order indicated in the table in figure.
    Fig 1: Main Fuse, Connector, Nut And Bolt With Torque Specifications
    G07878391Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault