FixVault
Home › Mazda › 2011 › RX-8 R3, 1.3 2 › Repair and Diagnosis › External Pages › Different car › Section 557 (Dynamic Stability Control System) › Steering Angle Sensor Initialization Procedure › DSC Off Switch Removal/Installation

DSC Off Switch Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove in the order indicated in the figure below.
    Fig 1: Identifying DSC OFF Switch Removal/Installation Components
    G05985226Courtesy of MAZDA MOTORS CORP.
  2. Install in the reverse order of removal.
About FixVault