Condenser Removal/Installation

Disconnect the negative battery cable.
Remove the following parts:
1. Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
2. Sub-trunk (See SUB-TRUNK REMOVAL/INSTALLATION .)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Third-row seat belt lower anchor installation bolt (LH) (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION .)
6. Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
Disconnect the connector.

Fig 1: Condenser, Connector And Bolt With Torque Specifications
Remove the bolt.
Remove the condenser.
Install in the reverse order of removal.