FixVault
Home › Mazda › 2012 › 5 Touring › Repair and Diagnosis › Steering › Power Steering › Electronic Power Steering System › Steering Wheel And Column Removal/Installation › Joint Bolt Installation Note

Joint Bolt Installation Note

  1. Install the steering shaft component to the steering gear.
  2. After temporarily install the joint bolt to the intermediate shaft joint, verify that the joint bolt is installed to the groove of the steering gear.
    Fig 1: Steering Gear And Joint Bolt With Torque Specifications
    G08152197
  3. Tighten the joint bolt to the specified torque.
About FixVault