FixVault
Home › Mazda › 2012 › 6 i Touring Plus › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System [MZR 2.5] › Before Service Precaution › Fuel Line Safety Procedure

Fuel Line Safety Procedure

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  2. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  3. Remove the fuse (FUEL PUMP 25A).
    Fig 1: Identifying Fuse (Fuel Pump 25A) Location
    G08140507
  4. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  5. Start the engine.
  6. After the engine stalls, crank the engine 2-3 times  .
  7. Switch the ignition to off.
  8. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
  9. Install the fuse (FUEL PUMP 25A).
About FixVault