Front Fog Light Bulb Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the fasteners, then slightly bend back the mudguard.
Disconnect the connector.

Fig 1: Identifying Front Fog Light Connector
Courtesy of MAZDA MOTORS CORP.
Rotate the front fog light bulb in the direction of the arrow shown in the figure.
CAUTION:
- A halogen bulb generates extremely high heat when it is used. If the surface of the bulb is soiled, excessive heat will build up and the light's life will be shortened. When replacing the bulb, hold the metal flange, not the glass.

Fig 2: Rotating Front Fog Light Bulb

Courtesy of MAZDA MOTORS CORP.

Remove the front fog light bulb
Install in the reverse order of removal.