Auto-Dimming Mirror Inspection: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rain sensor, (vehicles with auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION .)
- Remove the rain sensor cover, (vehicles without auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION .)
- Measure the voltage at each terminal (other than terminal A).
- If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)" and related wiring harnesses.
- Inspect the auto-dimming mirror connector for continuity at terminal A.
- If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the auto-dimming mirror.