Power Outer Mirror Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
Disconnect the power outer mirror connector

Fig 1: Power Outer Mirror Replacement Components With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

Remove the bolts
Push the power outer mirror against the vehicle and detach the tab while lifting the mirror up to remove.
Install in the reverse order of removal