License Plate Light Removal/Installation
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable
- Remove the recess. (See RECESS REMOVAL/INSTALLATION .)
- Remove the trunk rid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION )
- Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
- Remove the license plate light bulb. (See LICENSE PLATE LIGHT BULB REMOVAL/INSTALLATION .)
- Press tab A in the direction of the arrow (1) shown in the figure, press the license plate light in the direction of the arrow (2), and detach tab B.
- Remove the license plate light.
- Install in the reverse order of removal.