FixVault
Home
›
Mazda
›
2012
›
6 s Touring Plus
›
Repair and Diagnosis
›
External Pages
›
Different variant/trim
›
Section 2 (Engine Control System [MZR 2.5])
›
Pcm Inspection
›
Inspection Using An Oscilloscope (Reference)
›
CMP sensor signal
CMP sensor signal
WARNING:
This page is about a different variant/trim than selected.
Fig 1: CMP Sensor Signal Waveform
PCM terminals
2S(+)-body ground(-)
Oscilloscope setting
1 V/DIV (Y), 25 ms/DIV (X), DC range
Vehicle condition
Idle (after warm up)