FixVault
Home › Mazda › 2012 › MX-5 Miata Special Edition › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  4. Remove in the order indicated in the illustration.
    Fig 1: Ignition Switch, Screw And Connector
    G06149169Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
About FixVault