Clearance Inspection
- Remove the rear ABS wheel-speed sensor.
- Measure the distance between the rear ABS wheel-speed sensor installation surface and the ABS sensor rotor. This is dimension A.
- Calculate the clearance between the rear ABS wheel-speed sensor and the ABS sensor rotor using the following formula:
Clearance (mm {in}) = A-9.525 {0.3750}
- Verify that the clearance between the ABS sensor rotor and the rear ABS wheel-speed sensor is as indicated below.
- If there is any malfunction, verify the installation condition and replace if necessary.
Clearance
0.40-1.15 mm {0.016-0.045 in}