Manual Transaxle Installation Note
WARNING:
- Install the transaxle carefully, holding it steady. If the transaxle falls it could be damaged or cause injury.
- Set the transaxle on a jack and lift into place.
- Install the transaxle mounting bolts.
- Adjust the SST
(49 C017 5A0) so that the engine is located at the specified position.
Tightening torque
A: 64-89 N.m {6.6-9.0 kgf.m, 48-65 ft.lbf}
B: 38-52 N.m {3.9-5.3 kgf.m, 29-38 ft.lbf}