FixVault
Home › Mazda › 2013 › 5 Touring › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System/Washer System › Windshield Wiper Motor Disassembly/Assembly › Windshield Wiper Motor Assembly Note

Windshield Wiper Motor Assembly Note

  1. Connect the windshield wiper motor to the vehicle wiring harness connector, operate the windshield wipers, and then stop them at the auto-stop position.
  2. Adjust the motor crank, wiper link No.1, and wiper link No.2 so that they are parallel as shown in the figure.
    Fig 1: Adjusting Motor Crank, Wiper Link No.1 And Wiper Link No.2
    G08153389
  3. Assemble the windshield wiper motor.
About FixVault