FixVault
Home › Mazda › 2013 › 5 Touring › Repair and Diagnosis › Brakes › Traction Control › Abs/Dynamic Stability Control System › DSC HU/Cm Removal/Installation › Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/CM.
    Fig 1: Placing Alignment Mark On Brake Pipe And DSC HU/CM
    G08150684
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
About FixVault