FixVault
Home › Mazda › 2013 › 6 i Touring Plus › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation › Front Inner Handle

Front Inner Handle

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
    Fig 1: Door Lock Switch And Connector
    G08144493
  5. Disconnect each cable and remove the front inner handle.
    Fig 2: Front Inner Handle, Cable And Door Lock Knob Cable
    G08144494
  6. Install in the reverse order of removal.
About FixVault