FixVault
Home › Mazda › 2013 › CX-5 Touring, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Mechanical System › Plug Hole Plate Removal/Installation › Installation

Plug Hole Plate Removal/Installation: Installation

  1. Press the plug hole plate in the order shown in the figure to insert the adapter to the rubber on the engine side.
    Fig 1: Pressing Plug Hole Plate
    G09074085
  2. Press the front part of the plug hole plate at the same time to insert the rubber to the adapter on the engine side.
    Fig 2: Inserting Rubber Onto Engine Side Adapter
    G09074086
About FixVault