HO2S Heater Inspection
WARNING:
- A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Lift up the vehicle.
- Remove the floor under cover, (vehicles with floor under cover) (See FLOOR UNDER COVER REMOVAL/INSTALLATION ).
- Disconnect the HO2S connector.
- Measure the resistance between HO2S terminals C and D.
- If not as specified, replace the HO2S. (See HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION ).
HO2S heater resistance
2-50 ohms [normal temperature]