FixVault
Home › Mazda › 2013 › CX-5 Touring, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle [Shift Mechanism] › Automatic Transaxle Shift Mechanism Removal/Installation › Selector Lever Removal/Installation

Selector Lever Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the front console. (See FRONT CONSOLE REMOVAL/INSTALLATION ).
  3. Disconnect the selector lever component connector.
  4. Remove the selector cable (selector lever side). (See SELECTOR CABLE REMOVAL/INSTALLATION ).
    Fig 1: Identifying Selector Lever Component Connector
    G09075588
  5. Remove the nuts from the selector lever.
    Fig 2: Selector Lever Nuts With Torque Specification
    G09075589
  6. Remove the knob.
  7. Remove the selector lever.
  8. Install in the reverse order of removal.
    Fig 3: Identifying Selector Lever And Knob
    G09075590
About FixVault