FixVault
Home › Mazda › 2014 › 2 Touring, 1.5L Eng VIN Z, Eng CD MZR › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Control System [Body Control Module) › Body Control Module (BCM) Bracket Removal/Installation › Installation

Body Control Module (BCM) Bracket Removal/Installation: Installation

  1. Bend the tabs in the direction of the arrow (1) so that clearance (a) indicated below is within the specification.

    Clearance 

    a: 0.8-1.2 mm {0.032-0.047 in} 

    Fig 1: Identifying Clearance Between BCM Bracket And Tabs
    G09133704Courtesy of MAZDA MOTORS CORP.
  2. Press the BCM in the direction of the arrow (2) as shown below and install it.
  3. Install the BCM. (See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION ).
  4. Install the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
  5. Install the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION ).
  6. Connect the negative battery cable.
    Fig 2: Installing Body Control Module Bracket
    G09133705Courtesy of MAZDA MOTORS CORP.
About FixVault