FixVault
Home › Mazda › 2014 › 3 SV, Automatic Trans › Repair and Diagnosis › Restraints › Air Bag, SRS › Air Bag System [Two-Step Deployment Control System] › Side Air Bag Sensor Removal/Installation [Two-Step Deployment Control System] › Connector Disconnect Note

Connector Disconnect Note

  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Disconnecting Side Air Bag Sensor Connector Using Tape Wrapped Flathead Screwdriver
    G09076072Courtesy of MAZDA MOTORS CORP.
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
About FixVault