FixVault
Home
›
Mazda
›
2014
›
3 SV, Standard Trans
›
Repair and Diagnosis
›
External Pages
›
Different car
›
Section 10 (Engine Control System)
›
Pcm Inspection
›
Inspection Using An Oscilloscope (Reference)
›
Fuel pump control signal
Fuel pump control signal
WARNING:
This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
PCM terminals
2AE(+)-body ground(-)
Oscilloscope setting
5 V/DIV (Y), 2 ms/DIV (X), DC range
Vehicle condition
Idle after warm up
Fig 1: Display - Fuel Pump Control Signal Waveform
Courtesy of MAZDA MOTORS CORP.