FixVault
Home › Mazda › 2014 › 5 Sport, Automatic Trans › Repair and Diagnosis › Body & Frame › Door Locks › Security And Lock System › Inner Handle Removal/Installation › Sliding Door Inner Handle

Sliding Door Inner Handle

  1. Disconnect the negative battery cable.
  2. Remove the side door garnish. (See SIDE DOOR GARNISH REMOVAL/INSTALLATION .)
  3. Remove the rear side trim. (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  4. Remove the sliding door trim. (See SLIDING DOOR TRIM REMOVAL/INSTALLATION .)
  5. Disconnect the rod link from the remote controller.
    Fig 1: Rod Link And Remote Controller
    G08153037Courtesy of MAZDA MOTORS CORP.
  6. Remove the bolts.
    Fig 2: Sliding Door Inner Handle Screw And Bolts With Torque Specifications
    G08153038Courtesy of MAZDA MOTORS CORP.
  7. Remove the screw.
  8. Remove the sliding door inner handle.
  9. Install in the reverse order of removal.
About FixVault