| DETECTION CONDITION |
- Under the following conditions, input shaft and output shaft rotation ratio is 2.157 or less for 4 times
- Selector lever position is D or M position
- Gear position is 1GR
- Accelerator pedal position is 3.87% or more
Diagnostic support note
- The check engine light does not illuminate.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits 1GR
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Solenoid valve malfunction
- Pressure control solenoid A
- Shift solenoid A
- Line pressure malfunction
- Stall speed malfunction
- Forward clutch slipping
- One-way clutch No. 1 slipping
- Primary control valve body malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |