| DETECTION CONDITION |
- Under the following conditions, turbine rotation speed is 187 rpm or more
- Selector lever position is D or M position
- Accelerator pedal position is released
- Brake pedal position is depressed
- Vehicle speed is 0 km/h {0 mph}
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits 1GR, 2GR and 3GR
- Maximizes line pressure
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Shift solenoid A malfunction
- Line pressure malfunction
- Primary control valve body malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |