Instrument Cluster Disassembly/Assembly

CAUTION:

Do not drop the instrument cluster or damage the printed board. Doing so could cause a system malfunction.

When replacing the instrument cluster, always perform the configuration procedure. (See INSTRUMENT CLUSTER CONFIGURATION .)
Disconnect the negative battery cable.
Remove the upper column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
Remove the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
Remove the screws.

Fig 1: Identifying Upper Column Cover And Screws
Courtesy of MAZDA MOTORS CORP.
Remove the screws.

Fig 2: Identifying Upper Column Cover And Screws
Courtesy of MAZDA MOTORS CORP.
Remove the cover.

Fig 3: Identifying Instrument Cluster Cover And Instrument Cluster Rubber
Courtesy of MAZDA MOTORS CORP.
Remove the instrument cluster rubber.
Remove the screws, then remove the clips.

Fig 4: Identifying Instrument Cluster Cover, Screws And Clips
Courtesy of MAZDA MOTORS CORP.
Remove the screws, then remove the instrument cluster cover hood.

Fig 5: Identifying Screws, Panel And Instrument Cluster Cover Hood
Courtesy of MAZDA MOTORS CORP.
Release the tabs and remove the instrument cluster panel.

Fig 6: Identifying Tabs And Instrument Cluster Panel (1 Of 2)
Courtesy of MAZDA MOTORS CORP.

Fig 7: Identifying Tabs And Instrument Cluster Panel (2 Of 2)
Courtesy of MAZDA MOTORS CORP.
Release the tabs and remove the lenses.

Fig 8: Identifying Tabs And Instrument Cluster Lenses
Courtesy of MAZDA MOTORS CORP.
Assemble in the reverse order of disassembly.