Radiator Removal Note

Lift the radiator and remove it from the radiator installation holes on the shroud panel.
Move the radiator and condenser to the engine side.
Release the left and right tabs on the lower side of the radiator by pressing them in the direction shown below.

Fig 1: Releasing Left And Right Tabs On Lower Side Of Radiator
Courtesy of MAZDA MOTORS CORP.
Lift the condenser to remove it from the left and right insertion areas on the upper side of the radiator.

Fig 2: Lifting Condenser
Courtesy of MAZDA MOTORS CORP.
Set the condenser apart from the radiator.
Remove the radiator from below the engine compartment.