| DETECTION CONDITION |
- Under the following conditions, speed difference between engine speed and turbine rotation speed is 50 rpm or less
- Gear position is 4GR or 5GR
- Accelerator pedal position is 0.78% or less, 3.125-6.25% or 6.25% or more
- Vehicle speed is 70 km/h {43 mph} or less
- TCC operation is off
Diagnostic support note
- The check engine light does not illuminate.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits TCC control
- Maximizes line pressure
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Deteriorated ATF
- ATF level low
- Solenoid valve malfunction
- Pressure control solenoid A
- Shift solenoid A
- Shift solenoid B
- Shift solenoid C
- Shift solenoid D
- Shift solenoid E
- Line pressure malfunction
- Primary control valve body malfunction
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |