No. 3 Brake System Warning Light Stay On: Notes
NO. 3 BRAKE SYSTEM WARNING LIGHT STAY DETECTION CONDITION AND POSSIBLE CAUSE
| 3 |
Brake system warning lights stay on |
| POSSIBLE CAUSE |
- Brake fluid amount is low.
- Parking brake does not release.
- Parking brake switch or brake fluid level sensor stuck on.
- Short to ground in following circuit:
- Between parking brake switch and instrument cluster
- Between brake fluid level sensor and front body control module (FBCM)
- No connection at DSC HU/CM connector (When DSC HU/CM connector comes off, ABS warning light, brake system warning light, TCS/DSC indicator light, and TCS OFF indicator light illuminate.)
- DSC HU/CM detected malfunction. (Input and output device malfunction)
- DSC HU/CM detects low voltage in power supply.
- DSC HU/CM ground malfunction (When DSC HU/CM ground is not securely connected, ABS warning light, brake system warning light, TCS/DSC indicator light, and TCS OFF indicator light illuminate but diagnostic trouble code does not display.)
- DSC HU/CM does not operate.
- Front body control module (FBCM) detected malfunction.
- DSC HU/CM internal malfunction
- Instrument cluster detected malfunction
|