FixVault
Home › Mazda › 2014 › CX-5 Touring, 4D Utility, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security And Lock System › Keyless Receiver Removal/Installation

Keyless Receiver Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
    2. Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
  4. Remove the bolts.
  5. Remove the keyless receiver.
  6. Install in the reverse order of removal
    Fig 1: Keyless Receiver With Torque Specifications
    G09077091Courtesy of MAZDA MOTORS CORP.
About FixVault