FixVault
Home › Mazda › 2014 › CX-5 Touring, 4D Utility, AWD › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Line Pressure Inspection › Using M-MDS

Using M-MDS

  1. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Connect the M-MDS to the DLC-2.
  3. Using the simulation function "FP", start the fuel pump. (See ON-BOARD DIAGNOSTIC TEST .)
    Fig 1: Installing SST Quick Release Connector Into Fuel Pipe
    G09074853Courtesy of MAZDA MOTORS CORP.
About FixVault