FixVault
Home › Mazda › 2014 › MX-5 Miata Club, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System › DSC HU/Cm Removal/Installation › Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipes and DSC HU/CM.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipes.
    Fig 1: Alignment Mark On Brake Pipes And DSC HU/CM
    G06151322Courtesy of MAZDA MOTORS CORP.
About FixVault