FixVault
Home › Mazda › 2015 › 3 SV, Automatic Trans › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic - Engine Controls (3 Of 6) › DTC P050B 00: Cold Start Ignition Timing Performance Problem › Diagnostic Procedure

Diagnostic Procedure

DTC P050B:00 (SKYACTIV-G 2.0, SKYACTIV-G 2.5) - DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1 IDENTIFY TRIGGER DTC FOR FREEZE FRAME DATA (MODE 2) 
 Yes Go to the next step.
No Go to the TROUBLESHOOTING PROCEDURE for DTC on FREEZE FRAME DATA (Mode 2).
(See DTC TABLE [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
2 VERIFY FREEZE FRAME DATA (MODE 2)/SNAPSHOT DATA AND DIAGNOSTIC MONITORING TEST RESULTS HAVE BEEN RECORDED 
  • Have the FREEZE FRAME DATA (Mode 2)/snapshot data and DIAGNOSTIC MONITORING TEST RESULTS (cold start emission reduction strategy monitoring related) been recorded?
 Yes Go to the next step.
No Record the FREEZE FRAME DATA (Mode 2)/snapshot data and DIAGNOSTIC MONITORING TEST RESULTS on the repair order, then go to the next step.
3 VERIFY RELATED REPAIR INFORMATION AVAILABILITY 
  • Verify related Service Bulletins and/or on-line repair information availability.
  • Is any related repair information available?
 Yes Perform repair or diagnosis according to the available repair information.
  • If the vehicle Is not repaired, go to the next step.
No Go to the next step.
4 VERIFY DTC TROUBLESHOOTING COMPLETED 
 Yes Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
No Go to the next step.
5 VERIFY AFTER REPAIR PROCEDURE 
 Yes Go to the applicable DTC inspection.
(See DTC TABLE [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
No DTC troubleshooting completed.
About FixVault