FixVault
Home › Mazda › 2015 › 3 SV, Automatic Trans › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC Basic System › Refrigerant Line Removal/Installation › Refrigerant Line Installation Note (1)

Refrigerant Line Installation Note (1)

  1. Apply compressor oil to the O-rings and connect the joints.
  2. Tighten the joint bolt by hand.
  3. Connect the block joint type pipes by grasping the female side of the block with pliers or similar tool and holding firmly, then tighten the connection bolt or nut with a torque wrench.
    Fig 1: Connecting Block Joint Type Pipes By Grasping Female Side Of Block With Pliers
    G09771390Courtesy of MAZDA MOTORS CORP.
About FixVault