DTC P073D: 00 Neutral Incorrect Ratio: Notes
DTC P073D:00 DETECTION CONDITIONS AND POSSIBLE CAUSES (FW6A-EL)
| DTC P073D:00 |
Neutral incorrect ratio |
| DETECTION CONDITION |
- In P or N position, the following phenomenon occurs:
- Speed ratio is 0.5 or less
for 2 s
while vehicle is stopped in P or N position.
Diagnostic support note
- The check engine light does not illuminate.
- The automatic transaxle warning light does not illuminate.
- PENDING CODE is available.
- FREEZE FRAME DATA is not available.
- DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
Not applicable |
| POSSIBLE CAUSE |
- Clutch stuck
- Turbine/input shaft speed sensor malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |