Symptom Troubleshooting Item Table
- Use the chart below to verify the symptoms of the trouble in order to diagnose the appropriate area.NOTE:
- If a tire with a different diameter than the standard tire is installed, the TCM determines that the driving mode is the AAS mode, and may change to a different shift timing from the normal timing.
SYMPTOM TROUBLESHOOTING ITEM CHART (FW6A-EL)
| Troubleshooting item | Description | Page |
|---|---|---|
| Vehicle does not move in D, M or R position |
|
(See VEHICLE DOES NOT MOVE IN D, M OR R POSITION .) |
| Vehicle moves in P position, or parking gear does not disengage when P is disengaged |
|
(See VEHICLE MOVES IN P POSITION, OR PARKING GEAR DOES NOT DISENGAGE WHEN P IS DISENGAGED .) |
| Excessive creep |
|
(See EXCESSIVE CREEP .) |
| No creep at all |
|
(See NO CREEP AT ALL .) |
| Low maximum speed and poor acceleration |
|
(See LOW MAXIMUM SPEED AND POOR ACCELERATION .) |
| No shifting |
|
(See NO SHIFTING .) |
| Does not shift to 5GR or 6GR |
|
(See DOES NOT SHIFT TO 5GR OR 6GR .) |
| Abnormal shifting |
|
(See ABNORMAL SHIFTING .) |
| Frequent shifting |
|
(See FREQUENT SHIFTING .) |
| Shift point is high or low |
|
(See SHIFT POINT IS HIGH OR LOW .) |
| No kickdown |
|
(See NO KICKDOWN .) |
| Engine flares up or slips when upshifting or downshifting |
|
(See ENGINE FLARES UP OR SLIPS WHEN UPSHIFTING OR DOWNSHIFTING .) |
| Judder upon torque converter clutch (TCC) operation |
|
(See JUDDER UPON TORQUE CONVERTER CLUTCH (TCC) OPERATION .) |
| Excessive shift shock from N to D or N to R position |
|
(See EXCESSIVE SHIFT SHOCK FROM N TO D OR N TO R POSITION .) |
| Slow engaging after operating selector lever from N to D position |
|
(See SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION .) |
| Excessive shift shock is felt when upshifting and downshifting |
|
(See EXCESSIVE SHIFT SHOCK IS FELT WHEN UPSHIFTING AND DOWNSHIFTING .) |
| Excessive shift shock on torque converter clutch (TCC) |
|
(See EXCESSIVE SHIFT SHOCK ON TORQUE CONVERTER CLUTCH (TCC) .) |
| Noise occurs at idle when vehicle is stopped in all positions |
|
(See NOISE OCCURS AT IDLE WHEN VEHICLE IS STOPPED IN ALL POSITIONS .) |
| Noise occurs at idle when vehicle is stopped in D, M or R position |
|
(See NOISE OCCURS AT IDLE WHEN VEHICLE IS STOPPED IN D, M OR R POSITION .) |
| Transaxle overheats |
|
(See TRANSAXLE OVERHEATS .) |
| Engine stalls when shifted to D, M or R position |
|
(See ENGINE STALLS WHEN SHIFTED TO D, M OR R POSITION .) |
| Starter does not work |
|
(See STARTER DOES NOT WORK .) |
| Gear position indicator does not illuminate in M position |
|
(See GEAR POSITION INDICATOR DOES NOT ILLUMINATE IN M POSITION .) |
| Gear position indicator illuminates in P, R, N and D positions |
|
(See GEAR POSITION INDICATOR ILLUMINATES IN P, R, N AND D POSITIONS .) |
| M position indicator light does not illuminate in M position/M position indicator light illuminates in D position |
|
(See M POSITION INDICATOR LIGHT DOES NOT ILLUMINATE IN M POSITION/M POSITION INDICATOR LIGHT ILLUMINATES IN D POSITION .) |
| ATF seeping from automatic transaxle 1 |
|
(See ATF SEEPING FROM AUTOMATIC TRANSAXLE .) |