DTC P2299-00: Accelerator Pedal - Spring Back Malfunction: Notes

DTC P2299:00	Accelerator pedal: spring back malfunction
DETECTION CONDITION	Brake override system operates. Diagnostic support note This is a continuous monitor (other). The check engine light does not illuminate. FREEZE FRAME DATA (Mode 2) is not available. Snapshot data is available. The DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	Controls the throttle valve so that the engine speed is at specification. (Brake override system) : For MTX vehicles, engine speed is 1, 200 RPM when in neutral, and 1, 100 RPM when not in neutral. For ATX vehicles, engine speed is 1, 200 RPM when in N position, and 1, 100 RPM when in D position.
POSSIBLE CAUSE	Accelerator pedal sticking APP sensor signal malfunction APP sensor malfunction Related connector or terminals malfunction Related wiring harness malfunction Brake switch signal malfunction Brake switch malfunction Related connector or terminals malfunction Related wiring harness malfunction Brake pedal malfunction (increase in play due to joint pin wear) Driver depresses accelerator and brake pedals simultaneously (during braking operation using left foot) Accelerator pedal is pressed in due to object such as floor mat PCM malfunction
SYSTEM WIRING DIAGRAM	-