Clock Spring Adjustment [Two-Step Deployment Control System]

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Set the front wheels straight ahead.
CAUTION:
- The clock spring will break if over-wound. Do not forcibly turn the clock spring.
Fig 1: Turning Clock Spring Clockwise
Turn the clock spring clockwise until it stops.
Turn the clock spring counterclockwise approx. 2 turns.

Fig 2: Turning Clock Spring Counterclockwise (2 Turns)
Align the mark on the clock spring with the mark on the outer housing.

Fig 3: Identifying Alignment Marks On Clock Spring And Outer Housing
NOTE:
- After adjusting the alignment marks, the guides can be verified in the viewing slots shown in the figure.
Fig 4: Identifying Alignment Marks, Guides And Viewing Slot