FixVault
Home › Mazda › 2015 › CX-5 Touring, AWD › Repair and Diagnosis › External Pages › Different car › Section 9 (Power Systems) › Push Button Start Removal/Installation

Push Button Start Removal/Installation

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION ).
  3. While pressing the push button start tab in the direction of the arrow (1) shown in the figure, push out the push button start in the direction of the arrow (2) shown in the figure to detach the push button start tab from the meter hood.
    Fig 1: Disconnecting Push Button Start Tab From Meter Hood
    G09077802Courtesy of MAZDA MOTORS CORP.
  4. Remove the push button start.
  5. Install in the reverse order of removal.
    Fig 2: Identifying Push Button Start
    G09077803Courtesy of MAZDA MOTORS CORP.
About FixVault