A/C Unit Disassembly/Assembly: Notes

Disassemble in the order indicated in the table.
CAUTION:
- If a non-specified grease is used, it may result in abnormal noise or improper operation of the links. Apply only the specified grease to each link.

Assemble in the reverse order of disassembly.

Fig 1: Disassembled/Assembled View Of A/C Unit With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

A/C UNIT PARTS DESCRIPTION

Step	Part name	Disassembly/assembly of main parts
Step	Part name	Heater core	Evaporator temperature sensor	Evaporator
1	Polyurethane foam	X	X	X
2	Expansion valve	-	-	X
3	Adhesive polyurethane	-	-	-
4	Drain hose	-	-	-
5	Plate (1)	X	X	X
6	Plate (2)	X	X	X
7	Heater core	X	X	X
8	Driver-side air mix actuator (Full-auto air conditioner)	-	-	-
9	Driver-side air mix link (Full-auto air conditioner)	-	-	-
10	Passenger-side air mix actuator (Full-auto air conditioner)	-	-	-
11	Passenger-side air mix link (Full-auto air conditioner)	-	-	-
12	Air mix link (Manual air conditioner)	-	-	-
13	Airflow mode actuator (Full-auto air conditioner)	-	-	-
14	Airflow mode link set	-	-	-
15	Power MOS FET (Full-auto air conditioner)	-	-	-
15	Resistor (Manual air conditioner)	-	-	-
16	A/C case (1)	-	X	X
17	A/C case (2)	-	X	X
18	Evaporator temperature sensor (See EVAPORATOR TEMPERATURE SENSOR ASSEMBLY NOTE .)	-	X	X
19	Evaporator	-	-	X
20	A/C case (3)	-	-	-
21	A/C case (4)	-	-	-
22	Door damper	-	-	-
X: Applicable -: Not applicable