Screw Installation Note

NOTE:

The passenger-side air bag module fixing screws are set in the back side of the dashboard. Affix packing tape to phillips screwdriver so that the screws do not fall off while performing the work.

Insert a phillips screwdriver into the screw groove and fix it with packing tape.
Tighten the screw halfway.
Remove the packing tape.
CAUTION:
- If the packing tape is left in the vehicle when tightening the screw, it may become a source of noise. When tightening the screw, remove the packing tape so that it does not remain in the vehicle.
Fig 1: Identifying Packing Tape Of Applying Area On Phillips Screwdriver
Courtesy of MAZDA MOTORS CORP.
Tighten the screw completely.