FixVault

Front Fog Light Switch Inspection

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION ).
  3. Remove the light switch. (See LIGHT SWITCH REMOVAL/INSTALLATION ).
  4. Verify that the continuity between the light switch terminals is as indicated in the table.
    Fig 1: Continuity Reference Chart (Front Fog Light Switch)
    G09077495
    • If not as indicated in the table, replace the light switch.
      Fig 2: Identifying Front Fog Light Switch Connector Terminals
      G09077496