| DETECTION CONDITION |
- Gear ratio malfunction while in any gear 1st to 6th or clutch-slip DTC (P0729:00, P0731:00, P0732:00, P0733:00, P0734:00, P0735:00, P1728:00) occurs and vehicle is driven under gear ratio malfunction condition from fail-safe, or use of gear speeds in which clutch slip occurs is restricted.
- Determined that vehicle may be in danger due to clutch not engaging by TCM direction according to signal from the oil pressure switch.
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- DTC is stored in the TCM memory.
|