With Full-auto Air Conditioner System: Inspection

Switch the ignition ON.
Verify that the rear window defroster switch LED illuminates using the rear window defroster switch.
Verify that the heated outer mirrors and rear window defroster warm up.
- If the heated outer mirrors and the rear window defroster do not warm up, perform diagnosis for a possible CAN malfunction according to the CAN malfunction diagnosis flow. (Refer to FOREWORD .)
  - If a CAN malfunction has occurred, repair the malfunctioning location according to the diagnostic procedure of the CAN malfunction diagnosis flow. (Refer to CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW .)
  - If a CAN malfunction has not occurred, perform inspection of the each related part.
    Rear window defroster switch inspection
    - Use the heater, ventilation and air conditioning PID/data monitor inspection R/DEF_SW to inspect the rear window defroster switch. (Refer to PID/DATA MONITOR DISPLAY [FULL-AUTO AIR CONDITIONER] .) (Refer to PID/DATA MONITOR TABLE [FULL-AUTO AIR CONDITIONER] .)
      Inspection of rear window defroster control signal transmission condition for climate control unit
    - Use the heater, ventilation and air conditioning PID/data monitor inspection R/DEF_CS to inspect the rear window defroster control signal transmission condition. (Refer to PID/DATA MONITOR DISPLAY [FULL-AUTO AIR CONDITIONER] .) (Refer to PID/DATA MONITOR TABLE [FULL-AUTO AIR CONDITIONER] .)
      Inspection of rear window defroster control signal reception condition for front body control module (FBCM)
    - Use the front body control module (FBCM) PID/data monitor inspection DEFOG_R_CS to inspect the rear window defroster control signal reception condition. (Refer to PID/DATA MONITOR INSPECTION [FRONT BODY CONTROL MODULE (FBCM)] .) (Refer to PID/DATA MONITOR TABLE [FRONT BODY CONTROL MODULE (FBCM)] .)
      Rear window defroster relay ON/OFF control inspection
    - Measure the terminal voltage at the front body control module (FBCM) terminal 1P. (Refer to FRONT BODY CONTROL MODULE (FBCM) INSPECTION .)
      Rear window defroster relay inspection
    - Inspect the rear window defroster relay. (Refer to RELAY INSPECTION .)
      Rear window defroster inspection
    - Inspect the rear window defroster. (Refer to REAR WINDOW DEFROSTER INSPECTION .)
      Heated outer mirror inspection
    - Inspect the heated outer mirrors. (Refer to OUTER MIRROR GLASS INSPECTION .)