Washer Fluid-Level Sensor Inspection

1. Disconnect the negative battery cable.
2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
3. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
4. Verify that continuity between the washer fluid-level sensor terminals is as indicated in the table.

Courtesy of MAZDA MOTORS CORP.

• If not as specified, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION .)

Courtesy of MAZDA MOTORS CORP.