Clutch Pedal Position (CPP) Switch Inspection: Notes

1. Verify that the CPP switch is installed properly.
2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
4. Disconnect the CPP switch connector.
5. Inspect for continuity between CPP switch terminals A and B.

Courtesy of MAZDA MOTORS CORP.

• If not as specified, replace the CPP switch. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [G66M-R] .)