DTC P0720-00: Output Shaft Speed Sensor Range/Performance Problem: Notes

DTC P0720:00	Output shaft speed sensor range/performance problem
DETECTION CONDITION	Under the following conditions, there is difference between vehicle speed signal from DSC HU/CM and output shaft speed sensor signal for: Engine is running. The vehicle is driven at the specified speed or more. Vehicle speed signal related DTC is not recorded. There is no difference between vehicle speed signal from DSC HU/CM and turbine/input shaft speed sensor signal. DTC P0721:00 and P0722:00 are not recorded.
FAIL-SAFE FUNCTION	Inhibits learning control. Inhibits manual mode. Inhibits neutral idle control. Inhibits AAS.
POSSIBLE CAUSE	Output shaft speed sensor malfunction
SYSTEM WIRING DIAGRAM	Not applicable