Request Switch Inspection: Liftgate

1. Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
2. Remove the request switch. (Refer to REQUEST SWITCH REMOVAL/INSTALLATION .)
3. Verify that the continuity is as indicated in the table.

Fig 1: Request Switch (Liftgate) Terminals Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Request Switch (Liftgate) Connector Terminals

Courtesy of MAZDA MOTORS CORP.

• If not as indicated in the table, replace the request switch. (Refer to REQUEST SWITCH REMOVAL/INSTALLATION .)