Power Outer Mirror Switch Inspection

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
Remove the power outer mirror switch. (See POWER OUTER MIRROR SWITCH REMOVAL/INSTALLATION .)
Verify that the continuity between the power outer mirror switch terminals is as indicated in the table.

Fig 1: Continuity Reference Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Power Outer Mirror Switch - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the power outer mirror switch. (See POWER OUTER MIRROR SWITCH REMOVAL/INSTALLATION .)